////////////////////////////////////////////////////////////////////////

 

 

 

"UKRTRUBOIZOL" -   Guarantee of Quality

 

Scientific and production company "Ukrtruboizol" (UTI) is the first company in Ukraine to produce a two-layer anticorrosion coating on tubes of 89 to 530 mm outside diameter by industrial polyethylene extrusion.

Tubes with this coating are used for underground gas, oil, and water supply pipelines operating with products at temperatures from –40 to +70˚C.

Unlike bituminous, polymer tape and other coating methods used presently in Ukraine, the PE extrusion onto a hard adhesive sublayer provides for much higher quality of the coating, especially its mechanical strength, high adhesion, low water permeability and absorption; these guarantee long service life (40 to 50 years) and operational safety of pipelines.

The coating consists of PE layer of 2.5 to 3.0 mm thickness extruded onto a hard adhesive sublayer which is copolymer of ethylene with vinylacetate. The adhesive sublayer provides for high adhesion of the outer coating while the PE guarantees high mechanical strength.

Technical specification TU U 13457882.001-2001 on PE-coated tubes from UTI has been approved by Ukrainian gas and oil supervision agency (NAK "Neftegas of Ukraine") and by State labor safety department (Gosnadzorohrantruda); this specification provides the basic for design and construction of new oil & gas pipelines in Ukraine.

Testing of PE-coated tubes shown their conformity to the requirements of GOST 9.602-89 "Underground facilities. General requirements to corrosion protection" and  GOST 25812-83 "Steel pipelines. General requirements to corrosion protection".

Besides, PE coating on tubes satisfies the main requirements of DIN 30670 "PE coatings" and GOST R 51164-98 "Steel pipelines. General requirements to corrosion protection".

"Ukrtruboizol" has been awarded the following quality certificates:

1.

Certificate of conformity UA 1.090.01355-01, issued by the Center of construction materials and structures; 

2.

Certificate of conformity UA 1.048.0009412-01, issued by the Center of oil and gas facilities inspection;

3.

Authorization 394.01.30-45.32.0 for highly specialized works issued by the State labor safety administration of Ukraine (Gosnadzorohrantruda);

4.

UTI coating is quoted as permissible in the state civil construction code of Ukraine (DBN B.2.5-20-2001).

Since the beginning of 90-s the two-layer anticorrosion coating on stell tubes by industrisl polyethylene extrusion has begun a high priority in world practice.

 
 
 
 

UTI, 73/307 Vorontsova Ave., Dniepropetrovsk 49081, Ukraine.Tel./fax: (380+562)231-519, 231-522, E-mail: uti@ukr.net

Мы перебрались на новое место.
Hosted by uCoz